Download document: EN
Las Vegas, NV (April 6, 2011) - Arecont Vision, the industry leader in IP-based megapixel
camera technology, announces that a new series of Best Practices Training Videos are now
available on YouTube. The new videos have been produced to help integrators and users get
the most out of their Arecont Vision megapixel cameras. The videos are presented by
Arecont Vision Director of Field Applications, Ted Brahms, and cover basic issues such as
focusing Arecont Vision megapixel cameras; updating firmware; setup and installation of
MegaDome® all-in-one integrated megapixel cameras, lens and IP66 environmental dome
housing; and troubleshooting 101; setup and installation of Arecont Vision MegaVideo®
cameras; MegaVideo® product tour; setup and installation of SurroundVideo® cameras;
SurroundVideo® product tour; setup and installation of MegaView™ cameras; MegaView™
product tour.
“Our new Best Practices Training Videos demonstrate the simplicity of installing and operating
Arecont Vision megapixel cameras in a show-and-tell format that is easily understood,” said
Scott Schafer, Executive Vice President, Sales and Marketing, Arecont Vision. “This new video
series further exemplifies Arecont Vision’s focus on providing our channel partners with the
resources they need to be more successful.”
The first videos in the new series include: “Focusing Your Cameras” video which runs for less
than four minutes in length and covers seven simple focus steps. The “Troubleshooting 101”
video which runs approximately five minutes, covers basic procedures such as ensuring the
camera is receiving the correct voltage and power, that the data cables are working, and
that the cameras’ network LEDs are illuminated. The “Updating Firmware” video, at a little
over 5 minutes in length, shows customers how to verify that an Arecont Vision camera has
the latest firmware installed. At approximately 11 minutes in length each, two “Setup and
Installation” videos emphasize the ease of installation of Arecont Vision's MegaDome® and
SurroundVideo® lines. “Web Interface for Arecont Vision Cameras,” six minutes, explains how
to use the web interface to adjust and control Arecont Vision megapixel IP cameras.
All Best Practices Videos from Arecont Vision can be found by visiting:
http://www.youtube.com/user/ArecontVision.
For more information contact Arecont Vision by calling toll free 1-877-CAMERA-8, or visiting
www.arecontvision.com.
About Arecont Vision
Arecont Vision is the leading manufacturer of high-performance megapixel IP cameras and
associated software. Arecont Vision products are made in the USA and feature low-cost
massively parallel image processing architectures MegaVideo® and SurroundVideo® that
represent a drastic departure from traditional analog and network camera designs. All-in-one
products such as MegaDome® and MegaView™ provide installer friendly solutions. Compact
JPEG and H.264 series of cameras address cost sensitive applications. These innovative
technologies enable Arecont Vision to deliver multi-megapixel digital video at IP VGA
camera price points.
XXX
*EDITORS' NOTE: Electronic files and photos are available upon request by emailing Jennifer
O'Reilly at in|fusion advertising at [email protected].